Techno Press

Home

Editors-in-Chief
Prof. Philippe Miele

    Ecole Nationale Superieure de Chimie
    de Montpellier & IUF, 34296 Montpellier, France

    Prof. Francisco Marquez Linares

    School of Science and Technology
    University of Turabo
    Gurabo 00725, Puerto Rico

    Prof. Nasr Bensalah

    Department of Chemistry & Earth Science
    College of Arts & Science, Qatar Universtiy
    2713 Doha, State of Qatar

Managing Editor
Prof. Chang-Koon Choi

Korea Advanced Institute of Science & Technology
Daejeon 34141, Korea

ISSN:2287-6316(Print) ISSN:2287-6324(Online)

Vol 9(4 issues) for 2023, Quarterly

Free Open Access journal: there is no charge for publishing open access.

For correspondence: [email protected]

Aims and Scope

The "Advances in Energy Research (ERi), An International Journal", aims at the valuable source of information and excellent publication channel for the international scientific community of energy research. The areas covered by the journal are research on;

- Energy and power production, distribution, and usage,
- Sustainable energy infrastructures and system reliability,
- Conventional energy and fuel sources,
- Renewable energy,
- Alternative energy (nuclear power, solar energy, hydrogen production, etc.),
- Electrochemical energy storage systems (batteries, fuel cells, capacitors, etc.),
- Energy efficiency and conservation,
- Energy policy and management,
- Energy and environment issues, and
- Other energy related topics.

Editorial Board
Dr. A.S. Abdulkareem Federal Univ of Tech Minna, Niger State, Nigeria Prof. L. Acosta-Michlik Potsdam Inst Climate Impact Res 14412 Potsdam, Germany Prof. S.I. Allakhverdiev Inst Plant Physiol Rus Acad of Sci Moscow 127276, Russia Prof. R. Anand Nat Inst of Tech TamilNadu-620 015, India Prof. C. Arbizzani Bologna Univ Bologna 40126, Italy Prof. M.M. Ardehali Amirkabir Univ of Tech Tehran 1591634311, Iran Dr. L. Aye Univ of Melbourne Parkville, VIC 3010, Australia Prof. N. Badi Univ of Houston Houston, TX 77004, USA Prof. P.N. Botsaris Democritus Univ of Thrace 69100 Komotini, Greece Prof. A. Caglar Kastamonu Univ 37150 Kastamonu, Turkey Prof. R. Carriveau Univ of Windsor Ontario N9B 3P4, Canada Dr. A.M. Chaparro CIEMAT 28040 Madrid, Spain Dr. K.H. Chen Nat Taiwan Univ Taipei City 10617, Taiwan Prof. Q. Chen Tsinghua Univ Haidian 100084, China Dr. K. Chiang RMIT Univ Melbourne, VIC 3001, Australia Prof. Y. Demirel Univ of Nebraska Lincoln Lincoln, NE 68508, USA	Prof. A.S. Elahi Islamic Azad Univ Tehran, Iran Prof. M. Gadi Univ of Nottingham Nottingham, NG7 2RD, UK Dr. F. Garcia Univ of Castilla-La Mancha 13001 Ciudad Real, Spain Prof. J.F.P. Gomes Lisbon Superior Eng Inst Lisbon 1959-007, Portugal Dr. Y. Himri Elec & Gas Nat ENT (Sonelgaz) Oran 31000, Algeri Prof. A.R.K. Ismail Univ of Campinas Campinas 13083-970, Brazil Prof. A.M.H. Kandil Taif Univ Taif 21974, Saudi Arabia Prof. E. Karatepe Ege Univ Bornova 35040, Turkey Prof. A. Kassem Sohag Univ Sohag, Governorate, Egypt Prof. A. Kumar Delhi Technol Univ Delhi 110042, India Prof. F. Kuznik Nat Inst Appl Sci Lyon 69621, France Dr. J.V. Li Texas State Univ Round Rock, TX 78666, USA Dr. B.T. Liddle Nat Univ Singapore Singapore Prof. F.Q. Liu Univ of Texas at Arlington TX 76019, USA Prof. L. Lombardi Niccolo Cusano Univ Rome 00166, Italy Prof. L.A. Luo French Nat Cntr for Sci Res (CNRS) 75016 Paris, France	Prof. M. McAleer Erasmus Univ of Rotterdam Rotterdam 3000, Netherlands Prof. V.S. Mohan Indian Inst Chemical Tech Hyderabad 500607, India Dr. M.A. Mujeebu Univ of Dammam Al-Dammam, Saudi Arabia Prof. M. Ni The Hong Kong Polytech Univ Kowloon, Hong Kong Prof. S. Okamoto Shimane Univ Matsue 690-8504, Japan Dr. A. Paiano Aldo Moro Univ of Bari 70121 Bari, Italy Prof. Z.J. Pan CSIRO Earth Sci & Resour Eng Clayton South, VIC 3169, Australia Prof. D. Popescu Gheorghe Asachi Tech Univ Iasi 700050 Iasi, Romania Dr. N. Rajalakshmi Cntr for Fuel Cell Tech Chennai 600 113, India Prof. J.Y. Ran Chongqing Univ Chongqing 400044, China Dr. S.H. Rhee Seoul Nat Univ Seoul 08826, Korea Dr. S.K. Tyagi SSS-Nat Inst of Renew Energy Kapurthala, Punjab 144602, India Prof. F.S. Wen Zhejiang Univ Hangzhou 310027, China Prof. D.F. Yang Lakehead Univ Thunder Bay, ON P7B 5E1, Canada Prof. P. Zagaglia Univ of Bologna 40126 Bologna BO, Italy Prof. M. Zucchetti Polytec Univ of Eng in Torino 10129 Torino TO, Italy

Guide to Authors (Last updated: Oct 25, 2023)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Open Access

There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.

Table of Contents.


		2024 Volume 9 No. 1
		2022 Volume 8 No. 1	No.2 No.3 No.4
		2020 Volume 7 No. 1	No.2
		2019 Volume 6 No. 1	No.2
		2017 Volume 5 No. 1	No.2 No.3 No.4
		2016 Volume 4 No. 1	No.2 No.3 No.4
		2015 Volume 3 No. 1	No.2 No.3 No.4
		2014 Volume 2 No. 1	No.2
		2013 Volume 1 No. 1	No.2

Subscription

2021 Subscription Rates

USD
Advances in Energy Research Volume 8 (4 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		320		300	+35

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

Research and Publication Ethics

All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:https://publicationethics.org/guidance/Guidelines.

1. Authorship

Authorship credit should be based on
    (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
   or interpretation of data for the work,
    (2) Drafting the work or revising it critically for important intellectual content,
    (3) Final approval of the version to be published, and
    (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
   to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

2. Originality, plagiarism and duplicate publication

Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the paper’s arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

3. Conflict of interest statement

The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors’ interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

4. Process for managing research and publication misconduct

When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an author’s idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, https://publicationethics.org/guidance/Flowcharts.
The discussion and decision on the suspected cases are carried out by the Editorial Board.

5. Editorial responsibilities

The Editorial Board will continuously work to monitor and safeguard publication ethics:
* Guidelines for retracting articles;
* Maintenance of the integrity of academic records;
* Preclusion of business needs from compromising intellectual and ethical standards;
* Publishing corrections, clarifications, retractions, and apologies when needed; and
* Excluding plagiarized and fraudulent data.
The editors maintain the following responsibilities:
* Responsibility and authority to reject and accept articles;
* Avoid any conflict of interest with respect to articles they reject or accept;
* Promote the publication of corrections or retractions when errors are found; and
* Preserve the anonymity of reviewers.

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Guide to Authors \| Ethics \|